What are the functions and areas of action of industrial cleaners?

Release time: 2023-06-07

Industrial cleaning is mainly to deal with the oil and dust generated by stamping oil, lubricating oil, cutting oil, anti-rust oil and so on in the process of industrial processing. Industrial cleaning is not only to clean away the pollutants of mechanical equipment and metal parts, but also to ensure that the cleanliness of the processing environment and the surface performance of metal parts will not be affected.

For the mechanical oil used in metal processing, if the oil adheres to the surface of the metal parts, it will affect the coating and assembly of the subsequent parts, and the oil on the parts will contaminate the workbench and other contacts during the transportation process, resulting in the entire production environment. Keep clean. Therefore, for the parts produced in the industry, in order not to affect the normal progress of the subsequent process, the surface dirt caused by each process needs to be cleaned with industrial cleaning agent in time. This can not only ensure that the production process is clean, but also ensure that the parts are clean in each processing process.

For industrial oil cleaning and dirt cleaning, the traditional cleaning is simple to use flammable and explosive substances such as kerosene and alcohol. Although this method is more common, but the cleanliness is not very good, for industrial heavy oil is difficult to clean, so industrial cleaning is better to choose industrial cleaning agent.

600E industrial cleaning agent can be used to clean the heavy oil and dirt accumulated in the industry. The oil can be finally decomposed into water and carbon dioxide, and these two final products will not affect the metal surface. Its ability to clean oil is the same as that of hydrocarbons, and it can clean pollutants below 200 μm. And the operator contact 600E industrial cleaning agent is no harm.

600E is an industrial cleaning agent that meets the requirements of VOCs, and it is a comparative advantage choice for industrial cleaning of heavy oil.

In fact, in order to reduce the oil pollution of oil products on metal parts, it is recommended to use 510D3 water-based rust inhibitor instead of rust-proof oil. It can not only implement the anti-rust process, but also ensure the clean and dry metal surface, which is a common oil-free anti-rust method.

■

Advantages and Application of Metal Processing Cutting Fluid

2024-03-21